diff --git a/keyboards/ploopyco/nano_2/config.h b/keyboards/ploopyco/nano_2/config.h new file mode 100644 index 0000000000..7d2b96fd8e --- /dev/null +++ b/keyboards/ploopyco/nano_2/config.h @@ -0,0 +1,33 @@ +/* Copyright 2024 Colin Lam (Ploopy Corporation) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define UNUSABLE_PINS \ + { GP1, GP3, GP4, GP6, GP8, GP10, GP14, GP16, GP18, GP20, GP22, GP24, GP25, GP26, GP27, GP28, GP29 } + +#define MOUSE_EXTENDED_REPORT + +#define PLOOPY_DRAGSCROLL_MOMENTARY +#define PLOOPY_DRAGSCROLL_DIVISOR_H 64.0 +#define PLOOPY_DRAGSCROLL_DIVISOR_V 64.0 + +#define PAW3222_CS_PIN GP5 +#define PAW3222_MOTION_PIN GP9 +#define PAW3222_SPI_DIVISOR 64 +#define SPI_SCK_PIN GP2 +#define SPI_MISO_PIN GP0 +#define SPI_MOSI_PIN GP7 diff --git a/keyboards/ploopyco/nano_2/info.json b/keyboards/ploopyco/nano_2/info.json new file mode 100644 index 0000000000..ad69a0c04e --- /dev/null +++ b/keyboards/ploopyco/nano_2/info.json @@ -0,0 +1,27 @@ +{ + "keyboard_name": "Ploopy Nano 2 Trackball", + "manufacturer": "Ploopy Corporation", + "url": "www.ploopy.co", + "maintainer": "ploopyco", + "usb": { + "vid": "0x5043", + "pid": "0x4CE5", + "device_version": "0.0.1", + "max_power": 100 + }, + "features": { + "bootmagic": true, + "extrakey": true, + "nkro": true, + "pointing_device": true + }, + "processor": "RP2040", + "bootloader": "rp2040", + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0, "matrix": [0, 0]} + ] + } + } +} diff --git a/keyboards/ploopyco/nano_2/keymaps/default/keymap.c b/keyboards/ploopyco/nano_2/keymaps/default/keymap.c new file mode 100644 index 0000000000..9fa7252a66 --- /dev/null +++ b/keyboards/ploopyco/nano_2/keymaps/default/keymap.c @@ -0,0 +1,23 @@ +/* Copyright 2021 Colin Lam (Ploopy Corporation) + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2019 Sunjun Kim + * Copyright 2019 Hiroyuki Okada + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( DRAG_SCROLL ) +}; diff --git a/keyboards/ploopyco/nano_2/readme.md b/keyboards/ploopyco/nano_2/readme.md new file mode 100644 index 0000000000..509a62f9fa --- /dev/null +++ b/keyboards/ploopyco/nano_2/readme.md @@ -0,0 +1,38 @@ +# Ploopy Nano 2 Trackball + +![Ploopyco Trackball Nano 2](https://cdn.ploopy.co/nano2-media-assets/site-photos/_MG_2495.jpg) + +It's a DIY, QMK Powered Trackball...Nano! + +* Maintainer: [PloopyCo](https://github.com/ploopyco) +* Key contributors: [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/) +* Hardware Supported: RP2040 +* Hardware Availability: [Store](https://ploopy.co/nano-2), [GitHub](https://github.com/ploopyco) + +Make example for this keyboard (after setting up your build environment): + + make ploopyco/nano_2/rev2_003:default + +Flashing example for this keyboard: + + make ploopyco/nano_2/rev2_003:default:flash + +# Building Firmware + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +# Triggering the Bootloader + +[Do you see those two golden holes in the board](https://ploopy.co/wp-content/uploads/2023/11/boot.jpg)? Those are called **vias**. They act exactly like a switch does. Right now, that switch is OFF. However, if you take a paperclip or a pair of metal tweezers and touch those two vias, the two vias will form an electrical connection. Effectively, that switch turns ON. + +Go ahead and connect the two vias, and then (while the vias are connected) plug in the Nano 2 board into your computer. + +The computer should recognise that a mass storage device was just plugged in. Once this is done, you should be able to drag and drop files onto the Nano 2 board, as if the board was a USB drive. Feel free to remove the tweezers or paperclip at this point. + +If you want to upload a new firmware file (a ".uf2" file, like "nano-2-awesome-version.uf2" or something), just drag it into the folder, and it'll automatically install on the Nano 2 board and restart itself, in normal operating mode. You're done! + +**TIP**: If your firmware is in some kind of strange state and uploading new firmware isn't fixing it, try uploading [a flash nuke](https://learn.adafruit.com/getting-started-with-raspberry-pi-pico-circuitpython/circuitpython#flash-resetting-uf2-3083182) to the Nano 2 board before flashing the new firmware. It wipes the memory of the Nano 2 board completely clean, which can help clear a few types of errors. + +# Customizing your Ploopy Nano 2 + +You can find customziation options [here](../readme.md). \ No newline at end of file diff --git a/keyboards/ploopyco/nano_2/rev2_003/keyboard.json b/keyboards/ploopyco/nano_2/rev2_003/keyboard.json new file mode 100644 index 0000000000..767a6ba154 --- /dev/null +++ b/keyboards/ploopyco/nano_2/rev2_003/keyboard.json @@ -0,0 +1,7 @@ +{ + "matrix_pins": { + "direct": [ + ["GP17"] + ] + } +} diff --git a/keyboards/ploopyco/nano_2/rev2_003/readme.md b/keyboards/ploopyco/nano_2/rev2_003/readme.md new file mode 100644 index 0000000000..052a17f396 --- /dev/null +++ b/keyboards/ploopyco/nano_2/rev2_003/readme.md @@ -0,0 +1 @@ +See the main readme for more details. This is just here for when future revisions of the board are released. diff --git a/keyboards/ploopyco/nano_2/rules.mk b/keyboards/ploopyco/nano_2/rules.mk new file mode 100644 index 0000000000..e468209eba --- /dev/null +++ b/keyboards/ploopyco/nano_2/rules.mk @@ -0,0 +1 @@ +POINTING_DEVICE_DRIVER = paw3222