include "colours.kdl"
include "host-specific.kdl"

input {
    keyboard {
        numlock
    }

    // Next sections include libinput settings.
    // Omitting settings disables them, or leaves them at their default values.
    // All commented-out settings here are examples, not defaults.
    touchpad {
        // off
        tap
        // dwt
        // dwtp
        // drag false
        // drag-lock
        natural-scroll
        // accel-speed 0.2
        // accel-profile "flat"
        // scroll-method "two-finger"
        // disabled-on-external-mouse
    }

    mouse {
        // off
        // natural-scroll
        // accel-speed 0.2
        // accel-profile "flat"
        // scroll-method "no-scroll"
    }

    trackpoint {
        // off
        // natural-scroll
        // accel-speed 0.2
        // accel-profile "flat"
        // scroll-method "on-button-down"
        // scroll-button 273
        // scroll-button-lock
        // middle-emulation
    }

    // Uncomment this to make the mouse warp to the center of newly focused windows.
    warp-mouse-to-focus

    // Focus windows and outputs automatically when moving the mouse into them.
    // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen.
    focus-follows-mouse max-scroll-amount="100%"
}


layout {
    // Set gaps around windows in logical pixels.
    gaps 16

    // These set global defaults for blur, however it needs to be enabled
    // individually on a per-window or per-layer basis as well for it to have
    // any effect.
    //
    // Certain apps that support the KDE blur protocol may blur themselves as well.
    blur {
      on
      noise 0.1
      passes 2
      radius 6

      // Sensible default, gets applied to blurred layer surfaces, as most of the
      // time, the actual surface is bigger than what is rendered on screen.
      // ignore-alpha 0.8
    }

    // When to center a column when changing focus, options are:
    // - "never", default behavior, focusing an off-screen column will keep at the left
    //   or right edge of the screen.
    // - "always", the focused column will always be centered.
    // - "on-overflow", focusing a column will center it if it doesn't fit
    //   together with the previously focused column.
    center-focused-column "never"

    // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
    preset-column-widths {
        // Proportion sets the width as a fraction of the output width, taking gaps into account.
        // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
        // The default preset widths are 1/3, 1/2 and 2/3 of the output.
        proportion 0.33333
        proportion 0.5
        proportion 0.66667

        // Fixed sets the width in logical pixels exactly.
        // fixed 1920
    }

    // You can also customize the heights that "switch-preset-window-height" (Mod+Shift+R) toggles between.
    // preset-window-heights { }

    // You can change the default width of the new windows.
    default-column-width { proportion 0.5; }
    // If you leave the brackets empty, the windows themselves will decide their initial width.
    // default-column-width {}

    // By default focus ring and border are rendered as a solid background rectangle
    // behind windows. That is, they will show up through semitransparent windows.
    // This is because windows using client-side decorations can have an arbitrary shape.
    //
    // If you don't like that, you should uncomment `prefer-no-csd` below.
    // Niri will draw focus ring and border *around* windows that agree to omit their
    // client-side decorations.
    //
    // Alternatively, you can override it with a window rule called
    // `draw-border-with-background`.

    // You can change how the focus ring looks.
    focus-ring {
        // Uncomment this line to disable the focus ring.
        off

        // How many logical pixels the ring extends out from the windows.
        width 4

        // Colors can be set in a variety of ways:
        // - CSS named colors: "red"
        // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa"
        // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others.

        // Color of the ring on the active monitor.
        active-color "#7fc8ff"

        // Color of the ring on inactive monitors.
        //
        // The focus ring only draws around the active window, so the only place
        // where you can see its inactive-color is on other monitors.
        inactive-color "#505050"

        // You can also use gradients. They take precedence over solid colors.
        // Gradients are rendered the same as CSS linear-gradient(angle, from, to).
        // The angle is the same as in linear-gradient, and is optional,
        // defaulting to 180 (top-to-bottom gradient).
        // You can use any CSS linear-gradient tool on the web to set these up.
        // Changing the color space is also supported, check the wiki for more info.
        //
        // active-gradient from="#80c8ff" to="#c7ff7f" angle=45

        // You can also color the gradient relative to the entire view
        // of the workspace, rather than relative to just the window itself.
        // To do that, set relative-to="workspace-view".
        //
        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
    }

    border {
        on
        width 4
    }

    // You can enable drop shadows for windows.
    shadow {
        // Uncomment the next line to enable shadows.
        // on

        // By default, the shadow draws only around its window, and not behind it.
        // Uncomment this setting to make the shadow draw behind its window.
        //
        // Note that niri has no way of knowing about the CSD window corner
        // radius. It has to assume that windows have square corners, leading to
        // shadow artifacts inside the CSD rounded corners. This setting fixes
        // those artifacts.
        //
        // However, instead you may want to set prefer-no-csd and/or
        // geometry-corner-radius. Then, niri will know the corner radius and
        // draw the shadow correctly, without having to draw it behind the
        // window. These will also remove client-side shadows if the window
        // draws any.
        //
        // draw-behind-window true

        // You can change how shadows look. The values below are in logical
        // pixels and match the CSS box-shadow properties.

        // Softness controls the shadow blur radius.
        softness 30

        // Spread expands the shadow.
        spread 5

        // Offset moves the shadow relative to the window.
        offset x=0 y=5

        // You can also change the shadow color and opacity.
        color "#0007"
    }

    // Struts shrink the area occupied by windows, similarly to layer-shell panels.
    // You can think of them as a kind of outer gaps. They are set in logical pixels.
    // Left and right struts will cause the next window to the side to always be visible.
    // Top and bottom struts will simply add outer gaps in addition to the area occupied by
    // layer-shell panels and regular gaps.
    struts {
        // left 64
        // right 64
        // top 64
        // bottom 64
    }
}

// Add lines like this to spawn processes at startup.
// Note that running niri as a session supports xdg-desktop-autostart,
// which may be more convenient to use.
// See the binds section below for more spawn examples.
environment {
    QT_QPA_PLATFORMTHEME "qt5ct"
}
// This line starts waybar, a commonly used bar for Wayland compositors.
spawn-sh-at-startup "/home/ceres/.dots/niri/random-wallpaper.sh"
spawn-sh-at-startup "qs -c shell"
spawn-sh-at-startup "echo start | sudo tee /sys/class/remoteproc/remoteproc0/state"

// To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup:
// spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell"

hotkey-overlay {
    // Uncomment this line to disable the "Important Hotkeys" pop-up at startup.
    skip-at-startup
}

// Uncomment this line to ask the clients to omit their client-side decorations if possible.
// If the client will specifically ask for CSD, the request will be honored.
// Additionally, clients will be informed that they are tiled, removing some client-side rounded corners.
// This option will also fix border/focus ring drawing behind some semitransparent windows.
// After enabling or disabling this, you need to restart the apps for this to take effect.
prefer-no-csd

// You can change the path where screenshots are saved.
// A ~ at the front will be expanded to the home directory.
// The path is formatted with strftime(3) to give you the screenshot date and time.
screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png"

// You can also set this to null to disable saving screenshots to disk.
// screenshot-path null

// Animation settings.
// The wiki explains how to configure individual animations:
// https://yalter.github.io/niri/Configuration:-Animations
animations {
    // Uncomment to turn off all animations.
    // off

    // Slow down all animations by this factor. Values below 1 speed them up instead.
    // slowdown 3.0
}

// Window rules let you adjust behavior for individual windows.
// Find more information on the wiki:
// https://yalter.github.io/niri/Configuration:-Window-Rules

// Work around WezTerm's initial configure bug
// by setting an empty default-column-width.
window-rule {
    // This regular expression is intentionally made as specific as possible,
    // since this is the default config, and we want no false positives.
    // You can get away with just app-id="wezterm" if you want.
    match app-id=r#"^org\.wezfurlong\.wezterm$"#
    default-column-width {}
}

// Open the Firefox picture-in-picture player as floating by default.
window-rule {
    // This app-id regular expression will work for both:
    // - host Firefox (app-id is "firefox")
    // - Flatpak Firefox (app-id is "org.mozilla.firefox")
    match app-id=r#"firefox$"# title="^Picture-in-Picture$"
    open-floating true
}

window-rule {
    // This app-id regular expression will work for both:
    // - host Firefox (app-id is "firefox")
    // - Flatpak Firefox (app-id is "org.mozilla.firefox")
    match title="^qs-pass$"
    open-floating true
}

window-rule {
    // This app-id regular expression will work for both:
    // - host Firefox (app-id is "firefox")
    // - Flatpak Firefox (app-id is "org.mozilla.firefox")
    match title="^wallpaper-selector$"
    open-floating true
}

// Example: block out two password managers from screen capture.
// (This example rule is commented out with a "/-" in front.)
/-window-rule {
    match app-id=r#"^org\.keepassxc\.KeePassXC$"#
    match app-id=r#"^org\.gnome\.World\.Secrets$"#

    block-out-from "screen-capture"

    // Use this instead if you want them visible on third-party screenshot tools.
    // block-out-from "screencast"
}

// Example: enable rounded corners for all windows.
// (This example rule is commented out with a "/-" in front.)
window-rule {
    geometry-corner-radius 12
    clip-to-geometry true
    draw-border-with-background false
    blur {
        on
        noise 0.1
        passes 2
        radius 6
    }
}

window-rule {
    match app-id="zen"
    opacity 0.95
}

overview {
    backdrop-color "#1e1e2e"
}

binds {
    Mod+T hotkey-overlay-title="Open a Terminal: alacritty" { spawn "foot"; }
    Mod+D hotkey-overlay-title="Run an Application: fuzzel" { spawn "fuzzel"; }
    Super+Alt+L hotkey-overlay-title="Lock the Screen: swaylock" { spawn "swaylock"; }
    Mod+B { spawn "zen"; }
    Mod+P { spawn-sh "qs ipc -c shell call pass toggle"; }
    Mod+Space { spawn-sh "qs ipc -c shell call launcher toggle"; }
    Mod+W { spawn-sh "qs ipc -c shell call widgets toggle"; }
    Mod+L { spawn-sh "qs -c lock"; }

    Mod+Z repeat=false { toggle-overview; }

    Mod+Q repeat=false { close-window; }

    Mod+Left  { focus-column-left; }
    Mod+Down  { focus-window-or-workspace-down; }
    Mod+Up    { focus-window-or-workspace-up; }
    Mod+Right { focus-column-right; }
    Mod+N  { focus-column-left; }
    Mod+H  { focus-window-or-workspace-down; }
    Mod+O    { focus-window-or-workspace-up; }
    Mod+E { focus-column-right; }

    Mod+Ctrl+Left  { move-column-left; }
    Mod+Ctrl+Down  { move-window-down-or-to-workspace-down; }
    Mod+Ctrl+Up    { move-window-up-or-to-workspace-up; }
    Mod+Ctrl+Right { move-column-right; }
    Mod+Ctrl+N  { move-column-left; }
    Mod+Ctrl+H  { move-window-down-or-to-workspace-down; }
    Mod+Ctrl+O    { move-window-up-or-to-workspace-up; }
    Mod+Ctrl+E { move-column-right; }

    Mod+Home { focus-column-first; }
    Mod+End  { focus-column-last; }
    Mod+Ctrl+Home { move-column-to-first; }
    Mod+Ctrl+End  { move-column-to-last; }

    Mod+Shift+Left  { focus-monitor-left; }
    Mod+Shift+Down  { focus-monitor-down; }
    Mod+Shift+Up    { focus-monitor-up; }
    Mod+Shift+Right { focus-monitor-right; }

    Mod+Shift+Ctrl+Left  { move-column-to-monitor-left; }
    Mod+Shift+Ctrl+Down  { move-column-to-monitor-down; }
    Mod+Shift+Ctrl+Up    { move-column-to-monitor-up; }
    Mod+Shift+Ctrl+Right { move-column-to-monitor-right; }

    // Alternatively, there are commands to move just a single window:
    // Mod+Shift+Ctrl+Left  { move-window-to-monitor-left; }
    // ...

    // And you can also move a whole workspace to another monitor:
    // Mod+Shift+Ctrl+Left  { move-workspace-to-monitor-left; }
    // ...

    // You can bind mouse wheel scroll ticks using the following syntax.
    // These binds will change direction based on the natural-scroll setting.
    //
    // To avoid scrolling through workspaces really fast, you can use
    // the cooldown-ms property. The bind will be rate-limited to this value.
    // You can set a cooldown on any bind, but it's most useful for the wheel.
    Mod+WheelScrollDown      cooldown-ms=150 { focus-workspace-down; }
    Mod+WheelScrollUp        cooldown-ms=150 { focus-workspace-up; }
    Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; }
    Mod+Ctrl+WheelScrollUp   cooldown-ms=150 { move-column-to-workspace-up; }

    Mod+WheelScrollRight      { focus-column-right; }
    Mod+WheelScrollLeft       { focus-column-left; }
    Mod+Ctrl+WheelScrollRight { move-column-right; }
    Mod+Ctrl+WheelScrollLeft  { move-column-left; }

    // Usually scrolling up and down with Shift in applications results in
    // horizontal scrolling; these binds replicate that.
    Mod+Shift+WheelScrollDown      { focus-column-right; }
    Mod+Shift+WheelScrollUp        { focus-column-left; }
    Mod+Ctrl+Shift+WheelScrollDown { move-column-right; }
    Mod+Ctrl+Shift+WheelScrollUp   { move-column-left; }

    Mod+1 { focus-workspace 1; }
    Mod+2 { focus-workspace 2; }
    Mod+3 { focus-workspace 3; }
    Mod+4 { focus-workspace 4; }
    Mod+5 { focus-workspace 5; }
    Mod+6 { focus-workspace 6; }
    Mod+7 { focus-workspace 7; }
    Mod+8 { focus-workspace 8; }
    Mod+9 { focus-workspace 9; }
    Mod+Ctrl+1 { move-column-to-workspace 1; }
    Mod+Ctrl+2 { move-column-to-workspace 2; }
    Mod+Ctrl+3 { move-column-to-workspace 3; }
    Mod+Ctrl+4 { move-column-to-workspace 4; }
    Mod+Ctrl+5 { move-column-to-workspace 5; }
    Mod+Ctrl+6 { move-column-to-workspace 6; }
    Mod+Ctrl+7 { move-column-to-workspace 7; }
    Mod+Ctrl+8 { move-column-to-workspace 8; }
    Mod+Ctrl+9 { move-column-to-workspace 9; }

    // Alternatively, there are commands to move just a single window:
    // Mod+Ctrl+1 { move-window-to-workspace 1; }

    // Switches focus between the current and the previous workspace.
    // Mod+Tab { focus-workspace-previous; }

    // The following binds move the focused window in and out of a column.
    // If the window is alone, they will consume it into the nearby column to the side.
    // If the window is already in a column, they will expel it out.
    Mod+BracketLeft  { consume-or-expel-window-left; }
    Mod+BracketRight { consume-or-expel-window-right; }

    // Consume one window from the right to the bottom of the focused column.
    Mod+Comma  { consume-window-into-column; }
    // Expel the bottom window from the focused column to the right.
    Mod+Period { expel-window-from-column; }

    Mod+R { switch-preset-column-width; }
    // Cycling through the presets in reverse order is also possible.
    // Mod+R { switch-preset-column-width-back; }
    Mod+Shift+R { switch-preset-window-height; }
    Mod+Ctrl+R { reset-window-height; }
    Mod+F { maximize-column; }
    Mod+Shift+F { fullscreen-window; }

    // Expand the focused column to space not taken up by other fully visible columns.
    // Makes the column "fill the rest of the space".
    Mod+Ctrl+F { expand-column-to-available-width; }

    Mod+C { center-column; }

    // Center all fully visible columns on screen.
    Mod+Ctrl+C { center-visible-columns; }

    // Finer width adjustments.
    // This command can also:
    // * set width in pixels: "1000"
    // * adjust width in pixels: "-5" or "+5"
    // * set width as a percentage of screen width: "25%"
    // * adjust width as a percentage of screen width: "-10%" or "+10%"
    // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
    // set-column-width "100" will make the column occupy 200 physical screen pixels.
    Mod+Minus { set-column-width "-10%"; }
    Mod+Equal { set-column-width "+10%"; }

    // Finer height adjustments when in column with other windows.
    Mod+Shift+Minus { set-window-height "-10%"; }
    Mod+Shift+Equal { set-window-height "+10%"; }

    // Move the focused window between the floating and the tiling layout.
    Mod+V       { toggle-window-floating; }
    Mod+Shift+V { switch-focus-between-floating-and-tiling; }

    // Toggle tabbed tile display mode.
    // Windows can be moved into or out of this tile using the
    // `move-window-into-or-out-of-group` action; example:
    // Mod+G { toggle-group; }
    // Mod+Alt+H { move-window-into-or-out-of-group "left"; }
    // Mod+Alt+L { move-window-into-or-out-of-group "right"; }
    // Mod+Alt+K { move-window-into-or-out-of-group "up"; }
    // Mod+Alt+J { move-window-into-or-out-of-group "down"; }

    // Actions to switch layouts.
    // Note: if you uncomment these, make sure you do NOT have
    // a matching layout switch hotkey configured in xkb options above.
    // Having both at once on the same hotkey will break the switching,
    // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
    // Mod+Space       { switch-layout "next"; }
    // Mod+Shift+Space { switch-layout "prev"; }

    Print { screenshot; }
    Ctrl+Print { screenshot-screen; }
    Alt+Print { screenshot-window; }

    // Applications such as remote-desktop clients and software KVM switches may
    // request that niri stops processing the keyboard shortcuts defined here
    // so they may, for example, forward the key presses as-is to a remote machine.
    // It's a good idea to bind an escape hatch to toggle the inhibitor,
    // so a buggy application can't hold your session hostage.
    //
    // The allow-inhibiting=false property can be applied to other binds as well,
    // which ensures niri always processes them, even when an inhibitor is active.
    Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; }

    // The quit action will show a confirmation dialog to avoid accidental exits.
    Mod+Shift+E { quit; }
    Ctrl+Alt+Delete { quit; }

    // Powers off the monitors. To turn them back on, do any input like
    // moving the mouse or pressing any other key.
    Mod+Shift+P { power-off-monitors; }
}